LONE WOLF HARP ATTACK

The HARP ATTACK is designed to provide true power tube distortion in a pedal. This pedal is not your typical tube preamp that uses a triode; this tube uses a subminiature beam power tube, the same type tube as a 6V6 to provide the tone of an overdriven single ended amp. It produces a fat punchy tone that can be set with the exact amount of overdrive desired. You can certainly tell there is a tube inside of this pedal. The pedal is designed with a high impedence input buffer providing 10M ohms of resistance to get the best tone from your crystal, CM or other high impedence microphone. A DRIVE control sets the amount of power tube saturation desired, an active tone control with a 20db range that is tuned for harp frequencies and an output VOLUME control sets the output level. The output of the pedal is also buffered with an FET amp that adds extra gain to extend the life of the tube, this gain is controled with the pedal volume control. Our current version now has a different tube to eliminate microphonics.